product categories

  • A turnbuckle is a piece of hardware used to eliminate slack and adjust tension in a rope, cable, or other tensioning system
  • A turnbuckle is a piece of hardware used to eliminate slack and adjust tension in a rope, cable, or other tensioning system
  • A turnbuckle is a piece of hardware used to eliminate slack and adjust tension in a rope, cable, or other tensioning system
  • Beam Clamps  are used to suspend or secure fixtures, wires, threaded rod and other hardware to beam flanges. They offer secure fixing without the need for welding and drilling, as well as clamps suitable for use on pitched beams.
  • HLC clamp is use for horizontal lifting and transfer of steel plates and is partic-ularly suited to this application due to the special thin ground plate and buffer cams which facilitate easy insertion and removal under the plate being lifted. It can also be used hanging vertically under a spreader. These clamps are light in weight relative to their lifting capacity. Please note that the WLL of these clamps is given based on a pair. The clamps are suitable for surface hard-nesses up to 37 RC.
  • VLC clamp is designed for vertical lifting and turning over of plates, the clamp possesses a safety device by which the lock is not disengaged even if the lifting rope is slackened. This clamp can be applied for a wide range of works which maintains a structure for safety against ground-touching shocks of the loads.
  • TPH is designed for pipe lifting use, especially for steel pipe, aluminum pipe and stainless steel pipe, as well as concrete pipe, in high efficient manner.
    • When using transport chains to transport cargo in or on your vehicle, Load Binders are necessary to maintain a secure load. Tie-down chains for cargo securement, without a Load Binder, will not secure cargo in place. Load Binders are strong and durable, are available in a number of styles & load ratings and are sized to match the chain that you are using.
    • ratchet binder uses two types of simple machines and has two tension hooks on each end and handle. The handle again serves as a lever plus there is the screw thread.
  • The end of a single wire rope is bent back along the rope to form the eye, and strands are hand-tucked into the body of the rope in what is called. This splice is tapered and concealed by tucking strand ends into the rope, making a sling that is easily pulled through narrow spaces; there are no rough ends to snag hands.
    • Helideck landing net is designed for use in high risky landing zones where it is essential to prevent helicopters skidding whilst landing, such as roof top helipads, ships, leisure yachts, and offshore oil rigs where skidding is a greater risk due to the danger of oil deposits being present on the landing platform
    • Our team of experienced technicians expertly manufacture the net by hand to the client specification using a low profile Knowless design, with only the finest material to withstand the most severe offshore weather conditions and ultra violet radiation. All helideck landing nets go through a strick quality control process to ensure that every weave is correct before it is delivered to the end of user.
  • Cable laid grommets can be used in all types of lifting operations. They come in different lengths and designs. This design gives great flexibility.
  • United Mekong Holding Company performs machining, manufacturing all kinds of steel cable sling 3mm to 40mm diameter from templates or according to customer requirements by hydraulic.

Title

Go to Top